How to handle a clogged water flosser

Water flossers not only help clean teeth deeply but also protect gums effectively. However, many users often encounter the problem of water flossers getting clogged when using. Let's find out the cause and how to solve this problem with TAPUHO.

What causes water flossers to clog?

Water flossers, also known as water jets or water jets, are an indispensable tool in maintaining oral health. With their ability to clean and sanitize, water flossers help reduce the risk of tooth decay, gingivitis, and other related problems. 

The principle of operation of the water flosser is based on water pressure, with the motor of the tank converting water into jets. These jets are used to spray between teeth and gums, removing plaque and excess food. 

However, after a period of use, the water flosser may encounter water clogging problems. To better understand the causes of this condition, we need to consider the common factors below:

Loose joints

The most obvious cause of a clogged water flosser is a loose nozzle. During installation or use, improper or loose fitting of the joint can result in insufficient water pressure or the machine not working to push water from the reservoir through the tube and into the oral cavity. 

Install the machine properly for efficient and safe operation.

Engine problem

Motor failure is one of the most common reasons for water flossers to clog. This is especially true for low-quality water flossers or those that have been used for a long time. Causes of motor failure can include prolonged use, impact damage that causes cracks, or exposure to dirt and moisture.

Insufficient water level in the tank

When the water level in the tank is insufficient, the water pressure cannot be maintained stably, resulting in uneven water jet generation. This not only affects the cleaning performance, but can also cause motor-related problems and affect the service life of the machine.

Accumulation of dirt and grime

Over time, dirt and debris can build up in the machine, reducing the water pressure. This buildup not only reduces the performance of the machine, but also increases the risk of dental hygiene problems. Therefore, you also need to pay attention to the quality of the water used.

Control buttons failure

Water can seep into the control buttons on the machine body, causing problems in the electrical circuit and damaging the machine. This is also a cause of clogged water flossers and needs to be fixed immediately.

Loose, frayed knobs can cause a clogged showerhead.

How to fix a clogged water flosser

Use cleaning solution

Like other devices, you can clean the nozzle with some simple formulas. You can use a mixture of vinegar, clean water or saline, etc. Pour the solution into the water tank and activate the machine for a certain amount of time to dissolve the dirt.

Clean the toothpick tip.

Remove the tip from the machine and clean it with a small brush and warm water or dental floss. Be sure to dry the tip before putting it back in the machine.

Check water pressure and joints

Make sure the water pressure is strong enough and the fitting is tight. If necessary, remove and reattach the fitting correctly to clear the clogged water flosser.

Contact the manufacturer

If after trying the above methods, the water flosser is still clogged. At this point, you should contact the supplier for warranty or repair support. Sometimes, the blockage problem can be more complicated and requires inspection and repair of parts or components inside the machine. Experienced technicians will determine the cause and take corrective measures.

How to maintain and prevent water flossers from clogging

Maintaining and preventing clogging of your water flosser requires proper care and maintenance to ensure the performance and longevity of the device. Here are some steps you can take:

• Regular cleaning: Perform regular cleaning of your water flosser according to the manufacturer's instructions. This includes cleaning the reservoir and nozzle to remove dirt and plaque buildup.
• Use clean water: Avoid using water that contains too many minerals and clogging substances. If the water quality in your area is poor, consider using filtered or bottled water to avoid scale buildup in the machine.
• Keep the machine in a cool, dry place to avoid mold and moisture formation. Avoid exposing the machine to direct sunlight and high heat sources, as this may damage components and wear out the machine.
• Check and change the filter: Periodically check and change the filter according to the manufacturer's instructions. A clean filter prevents sediment build-up, protecting your water flosser from clogging.

Tapuho TWT2024 Water Flosser - A product trusted by customers

To avoid clogging of the water flosser, besides proper maintenance and use of the machine, choosing a quality product is also extremely important. In the current market, the TAPUHO smart water flosser is a bright name, trusted and used by many customers.

• Design: Tapuho water flosser has an elegant white design, compact, and sturdy grip.
• Technology: TAPUHO TWT2024 uses a gentle water spray mechanism that does not damage the gums and has a safe start mechanism.
• Function: The machine has 5 different cleaning modes, suitable for all needs, from strong to gentle.
• Battery capacity: 2000mAh lithium battery, fast charging in 4 hours, continuous use for 30 days, convenient for travel and business.
• Water tank: 250ml capacity, convenient and safe with high quality plastic material, easy to clean and waterproof.
• Safety: IPX7 waterproof design, protect the product and prolong its life.

Tapuho TWT2024 water flosser is highly appreciated for both its usability and cleaning efficiency.

In particular, when purchasing at TAPUHO Vietnam, customers can be completely assured because the products are 100% genuine, directly imported with full documents proving their origin. We implement a long-term warranty and professional after-sales support, helping customers feel secure in using them.

Hopefully this article will help you understand the cause of the water flosser clogging and how to fix it to use the device in the most optimal way. To order a genuine water flosser, you can contact the hotline 1900 63 83 19 for free support!