Instructions on how to fix a slow juicer that does not produce pulp

Slow juicer not producing pulp is one of the common phenomena when using fruit and vegetable juice. Refer to the article below, Tapuho Vietnam will guide you on how to fix it effectively!

In the article below, we will help you find out the cause and how to fix the situation of slow juicers not producing pulp . 

Slow juicers not producing pulp can be due to many different reasons. 

Find out the reasons why the slow juicer does not produce pulp 

Slow juicers not producing pulp is a common problem. The main causes of this problem are the following: 

Slow juicer blade stuck 

The most common cause is that the slow juicer's blade is stuck and cannot be rotated or removed. This situation occurs because the slow juicer is fed too many ingredients at once. Or it could be that the vegetables or fruits you juice are too large or hard. This will cause a lot of fiber and pulp. Squeezing becomes difficult and even gets stuck. 

The filter is clogged. 

The second reason why the juicer is slow to produce pulp may be due to the filter being clogged. The fruit residue during the juicing process has blocked the holes, which will prevent the juice from coming out. And the pulp during the juicing process is also not pushed out. 

A slow juicer with a clogged filter will cause the holes to be blocked and the pulp will not come out. 

Slow juicer lid stuck 

A slow juicer with a stuck lid is a condition where the machine cannot open the lid because the vegetables, tubers, and fruits being juiced have too much fiber. Too much pulp is pushed out at once, causing the lid to get stuck and the pulp cannot be pushed out. 

Do not open the outer lid 

Slow juicers that do not produce pulp may also be due to the user forgetting to open the lid to let the pulp out when using the juicer. In this case, the machine will stop working and cannot squeeze juice as usual. 

Whole fruit will cause the slow juicer to stop working. 

Do not cut fruit into small pieces

Many types of large hard fruits can cause the pulp of the juicer to get stuck and cause problems. Therefore, to overcome this situation, you should cut the ingredients into small pieces to help the juicer work better. In addition, cutting the fruit into small pieces also helps the juicing process to take place faster. Save time and effort. 

Some ways to fix the problem of slow juicer not producing pulp 

To ensure the slow juicer works well and avoid jamming, you need to do the following: 

Regularly cleaning the slow juicer is very effective in preventing clogging of pulp. 

Clean the slow juicer regularly 

To ensure the slow juicer always works well, you need to clean the juicer periodically after each use. When cleaning, you need to disassemble all parts of the juicer including: filter, press tube, presser and blade... After cleaning and washing, dry and reassemble as before use. 

Choosing the right food 

Some foods can clog the slow juicer. Therefore, you need to consider when choosing foods to juice. Some foods such as carrots, apples, guava, green mango or spinach should not be juiced alone. You should mix in soft fruits such as bananas, strawberries, watermelon, grapes to reduce the clogging. 

Do not squeeze too many ingredients at once. 

When you use a slow juicer, if you squeeze too many ingredients at once, it can cause the machine to clog. Therefore, you should squeeze a sufficient amount of fruit and divide it into many different batches. This will allow you to squeeze quickly, squeeze out all the pulp without causing the pulp to clog. 

Do not press too many ingredients at the same time. 

Should buy slow juicer with support bar 

To prevent the slow juicer from getting stuck, you should buy a slow juicer equipped with a support bar. This part will help push the pulp out faster, minimizing the jamming situation. 

Tapuho TS30 slow juicer squeezes thoroughly, effectively prevents pulp from getting stuck 

If you are wondering which slow juicer to choose to prevent pulp jamming. Please refer to the Tapuho TS30 slow juicer. This is a slow juicer from the German brand with a superior design with a large pressing shaft that increases contact by 40%. From there, the machine can squeeze fruits and vegetables with up to 98% pulp. 

Tapuho TS30 slow juicer is equipped with a specialized anti-jamming blade. 

The machine is equipped with a specialized scraper that will help the raw material pressing process go more smoothly. The scraper will support the stuck pulp in the pressing tube more quickly and effectively. 

In particular, the Tapuho TS30 slow juicer has a large capacity of 250w, allowing you to juice many different types of ingredients. Even fruits and vegetables with high hardness such as: guava, star fruit, carrots, celery...

Tapuho slow juicer, German brand, durable with competitive price. 

Customers who need to consult and receive a quote for the Tapuho brand slow juicer. Please contact the hotline: 1900 638 319 for free advice and assistance!

Conclusion: 

Above, we have helped you find ways to fix the situation where the slow juicer does not produce pulp. To limit this situation, you need to regularly clean the slow juicer, choose and use the right type of food, do not squeeze too many ingredients at the same time. And especially if possible, you should buy slow juicers that are resistant to pulp jamming. Check out the Tapuho TS30 slow juicer!